Range catalogue

Proven designs to build from

Some of the more common configurations we build around Bundaberg and the Wide Bay. Use them for inspiration, then request a quote straight from the design, or, open in our 3D designer and make any changes you wish and request a quote from there,  and we will pull the model straight up and engineer it to your block. Every design can be resized, re-doored and re-coloured.

Every shed or carport design can be built with either a gable or a skillion roof profile, whichever suits the look and the limits on your block.

3 current specials across the range right now.

See current specials

Browse by build type

Sizes shown are width x length x wall height. Every design carries a code you can quote us over the phone or send through a quote request from our quote form or 3D designer.

Cream COLORBOND four-bay toy shed with dark roller doors, personal access door and window on a grassy rural block

SS-RUR-160-90

4 Bay Toy Shed 16 x 9

A bay each for every toy

Four separate lock-up bays across a 16m frontage: the van, the boat, the tractor and the project car, each with its own door.

9m
Width
16m
Length
4.2m
Wall height

Gable roof · 4 bays

  • 4 x roller doors 
  • 1 x PA door
  • 1 x window
  • COLORBOND® roof, walls and gutters
  • Custom corner and doorway flashings
  • Cast-in vermin rebate to the slab
  • Site-specific engineering and certification
See this design

9m x 16m x 4.2m

Light grey COLORBOND acreage shed with two charcoal roller doors, two windows, a personal access door and a full-length front awning

SS-ACR-180-90-AWN

Acreage Shed with Awning 18 x 9

Secure storage with a full-length covered work area

A substantial three-bay acreage shed with secure storage and a 6m deep full-length front awning. Two wide motorised roller doors provide easy vehicle and equipment access, while the covered apron creates practical space for parking, maintenance and outdoor work.

9m
Width
18m
Length
3.6m
Wall height

Gable roof · 3 bays

  • 18m x 9m enclosed three-bay shed - 3x 6m bays
  • 6m deep attached front awning across the full 18m length
  • 2 x Double Wide roller doors with Merlin motors
  • 1 x personal access door
  • 2 x windows
  • COLORBOND® roof, walls and gutters
  • Custom corner and doorway flashings
  • Cast-in vermin rebate to the slab
  • Site-specific engineering and certification
See this design

9m x 18m x 3.6m

How the design codes work

Each design carries a code like SS-GAR-60-60: the build type, then the width and length. Quote the code when you call or enquire and we can open the pre-built model in our design software straight away, then adjust it to your block. Nothing here is fixed - change the span, add bays, lift the walls or swap the doors.

Nothing here quite right? Everything we build is custom anyway

Draw it yourself in the 3D Designer or send us the rough idea and we will work it up with a site-specific quote.