Early-bird pricing on rural and machinery sheds
Lock in current steel pricing on machinery sheds and rural covers when you confirm your design before the end of the offer period.
Offer ends 30 December 2026
See the details
Rural & machinery · SS-RUR-220-360
Arena / Cattle Yard Cover 22 x 36
All-weather cover without closing the yards in
A 22m clear-span cover for cattle yards or an arena, open all around with skirt sheeting to keep out sun and weather while staying light and airy.
- 22m
- Width
- 36m
- Length
- 5m
- Wall height
Gable roof · 22m x 36m x 5m
Current special
What is included
- 22m clear span with no internal columns
- Open on all sides for unrestricted access
- 5m height for stock, vehicles and equipment
- Skirt sheeting around all sides for sun and weather protection
- Heavy-duty columns and rafters
- Site-specific engineering and certification
Standard specification
- Width
- 22.0m
- Length
- 36.0m
- Height
- 5.0m
- Roof profile
- Gable
- Internal span
- 22m clear span, no internal columns
- Sides
- Open all around with skirt sheeting
- Steel
- 100% Australian BlueScope and COLORBOND®
Standard specification shown. Sizes can all be changed to suit your site.
About this design
This 22m wide x 36m long clear-span cover creates a large, uninterrupted sheltered area with no internal columns through the main floor space.
That makes the design highly versatile. It can be used over cattle yards, as an arena cover, for machinery storage, vehicle access, agricultural work areas or other applications where a wide, open area is required.
All four sides remain open to maximise airflow and natural light, while perimeter skirt sheeting can provide some additional protection from direct sun and wind-driven weather without fully enclosing the structure.
With a 5m height, the building provides generous clearance for a wide range of rural and agricultural uses. Each structure is site-specifically engineered, with bay sizes and overall configuration able to be adjusted to suit the property and intended use.
Like our other Spartan Sheds designs, the structure uses welded plate portal-frame connections and custom-made flashings, with pier only or slab designs available.
The building can also be finished in your choice of COLORBOND® colours, with TRIMDEK® or corrugated steel cladding profiles available to suit the required appearance and application.
Popular options
Every design can be resized and reconfigured. These are the changes people make to this one most often.
- Dimensions adjusted to suit the arena or yard layout
- Skirt depth adjusted for the required sun and weather protection
- Bay widths adjusted to suit use
- Gutters and downpipes connected to water tanks
- Additional roof ventilation if required
Good to know
- The 22m clear span leaves the full covered width free of internal columns
- Open sides maintain airflow and visibility through the yards
- Footings and structural design are engineered for the site and local wind classification
Standard on every Spartan Sheds build
Built to a higher standard
Cast-in vermin rebate as standard
The slab is formed with a rebate that the wall sheet sits into, so the base line is sealed. No open gap for rodents, snakes. A 3mm gap is left at the bottom of the sheet to protect your Colorbond warranty, and for ease of hosing out.
Custom corner and door flashings
Corner, and door flashings are made to suit each build rather than pulled off a generic kit shelf, so all corners finish tight and straight, leaving no gaps or sharp edges.
Welded-type frame connections
Many standard kit sheds use light-gauge folded brackets at key structural connections. Spartan Sheds upgrades these critical junctions with heavy-duty welded steel plate connections and high-tensile structural bolts, with knee, apex and base plates engineered to suit the site-specific wind classification.
100% Australian BlueScope and COLORBOND® steel
Roof, walls, gutters and framing in Australian-made steel with the warranties that come with it, specified for our coastal and inland conditions.
Gable or skillion roof profile
Every design in the range can be built with a classic pitched gable roof or a single-slope skillion roof, chosen to suit the look you want, the site, and any height or setback limits on your block.
Site-specific engineering and drawings
Every build is engineered to the wind classification, soil and exposure of your actual block, not to a generic catalogue spec, and the drawings come with it for approval.
Priced to your site
We do not publish prices for a reason: wind classification, soil, slab and earthworks, truck access, coastal exposure and the council approval pathway all change from block to block, sometimes between neighbours. Send us the design code and your address and you will get a real, itemised quote at no cost.
More about rural & machinery