Garages & residential · SS-GAR-36-60
Single Garage 3.6 x 6
A compact single-bay garage with space for one vehicle, tools, bikes or general storage. A practical option where you want secure, weather-protected storage without taking up unnecessary space.
- 3.6m
- Width
- 6m
- Length
- 2.7m
- Wall height
Gable roof · 3.6m x 6m x 2.7m
What is included
- 1 x single roller door
- 1 x PA door
- 1 x window
- COLORBOND® roof, walls and gutters
- Custom corner and doorway flashings
- Cast-in vermin rebate to the slab
- Site-specific engineering and drawings
Standard specification
- Width
- 3.6m
- Length
- 6.0m
- Wall height
- 2.7m
- Roof profile
- Gable or skillion
- Roller door
- 1 x 2.7m wide x 2.2m high
- PA door
- 1 x 820mm wide x 2040mm high
- Window
- 1 x 900mm wide x 1200mm high
- Steel
- 100% Australian BlueScope and COLORBOND®
Standard specification shown. Sizes can all be changed to suit your site.
About this design
A compact single-bay garage that works particularly well on smaller blocks or where available building space is limited.
At 3.6m wide x 6m long, it provides secure space for a vehicle or plenty of room for shelving, tools, bikes or general storage.
The design can be easily adjusted to suit the property and how the shed will be used. Common changes include increasing the length for additional storage or workbench space, increasing the wall height, or adding windows, or a side roller door.
Like our other Spartan Sheds designs, it is built with welded plate portal-frame connections, a cast-in concrete vermin rebate and custom-made corner and door flashings.
You can also customise the finish with your choice of the full COLORBOND® colours range and select either TRIMDEK® or corrugated steel cladding profiles to suit the look and requirements of your project.
Popular options
Every design can be resized and reconfigured. These are the changes people make to this one most often.
- Longer 7.5m or 9m version for bench and storage at the rear
- 3m wall height for shelving and mezzanine storage
- Windows or solar roof ventilation
- Insulation to the roof for a cooler workspace
- Side access roller door
- Full COLORBOND® colour selection to match the house
Good to know
- 3.6m width suits one vehicle
- All builds are quoted site specific
- All buildings >10m2 need council approval; we handle that for you
Standard on every Spartan Sheds build
Built to a higher standard
Cast-in vermin rebate as standard
The slab is formed with a rebate that the wall sheet sits into, so the base line is sealed. No open gap for rodents, snakes. A 3mm gap is left at the bottom of the sheet to protect your Colorbond warranty, and for ease of hosing out.
Custom corner and door flashings
Corner, and door flashings are made to suit each build rather than pulled off a generic kit shelf, so all corners finish tight and straight, leaving no gaps or sharp edges.
Welded-type frame connections
Many standard kit sheds use light-gauge folded brackets at key structural connections. Spartan Sheds upgrades these critical junctions with heavy-duty welded steel plate connections and high-tensile structural bolts, with knee, apex and base plates engineered to suit the site-specific wind classification.
100% Australian BlueScope and COLORBOND® steel
Roof, walls, gutters and framing in Australian-made steel with the warranties that come with it, specified for our coastal and inland conditions.
Gable or skillion roof profile
Every design in the range can be built with a classic pitched gable roof or a single-slope skillion roof, chosen to suit the look you want, the site, and any height or setback limits on your block.
Site-specific engineering and drawings
Every build is engineered to the wind classification, soil and exposure of your actual block, not to a generic catalogue spec, and the drawings come with it for approval.
Priced to your site
We do not publish prices for a reason: wind classification, soil, slab and earthworks, truck access, coastal exposure and the council approval pathway all change from block to block, sometimes between neighbours. Send us the design code and your address and you will get a real, itemised quote at no cost.
More about garages & residential
