Standard layout shown. Tap the plan to enlarge. Bay widths, door and window positions can all be changed to suit your site.
Carports · SS-CPT-30-60
Single Carport 3 x 6
Shade over one vehicle
Built like a shed rather than a bracket kit. The same connections we use on commercial frames, sized for a single vehicle.
- 3m
- Width
- 6m
- Length
- 2.4m
- Wall height
Gable roof · 3m x 6m x 2.4m
What is included
- Welded-type plate and bolted connections
- COLORBOND® roof and gutters
- Galvanised posts
- Custom flashings and colour matched trims
- Gable, skillion or flat roof
- Site-specific engineering and drawings
Standard specification
- Width
- 3.0m
- Length
- 6.0m
- Clearance
- 2.4m
- Roof profile
- Gable, skillion or flat
- Vehicle capacity
- 1 vehicle
- Steel
- 100% Australian BlueScope and COLORBOND®
Standard specification shown. Sizes can all be changed to suit your site.
Popular options
Every design can be resized and reconfigured. These are the changes people make to this one most often.
- Gable, skillion / flat roof designs available
- Longer or wider to suit higher vehicles
- One or two shadow walls added for weather protection
- Hot dip gal or Colour matched posts
Good to know
- Standard 2.4m clearance suits most cars and 4wd's
- Carports still require approval in Bundaberg
Standard on every Spartan Sheds build
Built to a higher standard
Cast-in vermin rebate as standard
The slab is formed with a rebate that the wall sheet sits into, so the base line is sealed. No open gap for rodents, snakes. A 3mm gap is left at the bottom of the sheet to protect your Colorbond warranty, and for ease of hosing out.
Custom corner and door flashings
Corner, and door flashings are made to suit each build rather than pulled off a generic kit shelf, so all corners finish tight and straight, leaving no gaps or sharp edges.
Welded-type frame connections
Many standard kit sheds use light-gauge folded brackets at key structural connections. Spartan Sheds upgrades these critical junctions with heavy-duty welded steel plate connections and high-tensile structural bolts, with knee, apex and base plates engineered to suit the site-specific wind classification.
100% Australian BlueScope and COLORBOND® steel
Roof, walls, gutters and framing in Australian-made steel with the warranties that come with it, specified for our coastal and inland conditions.
Gable or skillion roof profile
Every design in the range can be built with a classic pitched gable roof or a single-slope skillion roof, chosen to suit the look you want, the site, and any height or setback limits on your block.
Site-specific engineering and drawings
Every build is engineered to the wind classification, soil and exposure of your actual block, not to a generic catalogue spec, and the drawings come with it for approval.
Priced to your site
We do not publish prices for a reason: wind classification, soil, slab and earthworks, truck access, coastal exposure and the council approval pathway all change from block to block, sometimes between neighbours. Send us the design code and your address and you will get a real, itemised quote at no cost.
More about carports
