Carports · SS-CPT-40-120
Caravan / Boat cover 4 x 12
Open-sided cover for the van or boat
A freestanding open-sided cover designed for caravans, boats, motorhomes and other taller vehicles.
- 4m
- Width
- 12m
- Length
- 3.5m
- Wall height
Attached roof · 4m x 12m x 3.5m
What is included
- COLORBOND® roof and gutters & trims
- Welded-type plate and bolted connections
- Galvanised posts
- Site-specific engineering and drawings
Standard specification
- Width
- 4.0m
- Length
- 12.0m
- Clearance
- 3.5m
- Roof profile
- Skillion / Gable
- Sides
- Open
- Steel
- 100% Australian BlueScope and COLORBOND®
Standard specification shown. Sizes can all be changed to suit your site.
About this design
A freestanding open-sided cover designed for caravans, boats, motorhomes and other taller vehicles.
The 4m x 12m footprint provides generous covered space while keeping access open and straightforward. It is a practical option where weather protection is needed without fully enclosing the area. Shadow walls are an option where extra weather protection is required.
The standard design uses galvanised steel posts with welded plate connections. Hot-dip galvanising and colour-matched powder coating are available as optional upgrades.
Choose from the full COLORBOND® colour range, with TRIMDEK® or corrugated steel roofing profiles available to suit the property and surrounding buildings.
Popular options
Every design can be resized and reconfigured. These are the changes people make to this one most often.
- Dimensions adjusted to your van, boat or motorhome
- Partial wall or skirt sheeting for extra weather protection
- Lighting, power points - Very handy
- Concrete slab or pier only designs
Good to know
- Measure your van at its tallest point, including hatches, solar and air conditioner
- Allow straight-line reversing room in front of the cover
Standard on every Spartan Sheds build
Built to a higher standard
Cast-in vermin rebate as standard
The slab is formed with a rebate that the wall sheet sits into, so the base line is sealed. No open gap for rodents, snakes. A 3mm gap is left at the bottom of the sheet to protect your Colorbond warranty, and for ease of hosing out.
Custom corner and door flashings
Corner, and door flashings are made to suit each build rather than pulled off a generic kit shelf, so all corners finish tight and straight, leaving no gaps or sharp edges.
Welded-type frame connections
Many standard kit sheds use light-gauge folded brackets at key structural connections. Spartan Sheds upgrades these critical junctions with heavy-duty welded steel plate connections and high-tensile structural bolts, with knee, apex and base plates engineered to suit the site-specific wind classification.
100% Australian BlueScope and COLORBOND® steel
Roof, walls, gutters and framing in Australian-made steel with the warranties that come with it, specified for our coastal and inland conditions.
Gable or skillion roof profile
Every design in the range can be built with a classic pitched gable roof or a single-slope skillion roof, chosen to suit the look you want, the site, and any height or setback limits on your block.
Site-specific engineering and drawings
Every build is engineered to the wind classification, soil and exposure of your actual block, not to a generic catalogue spec, and the drawings come with it for approval.
Priced to your site
We do not publish prices for a reason: wind classification, soil, slab and earthworks, truck access, coastal exposure and the council approval pathway all change from block to block, sometimes between neighbours. Send us the design code and your address and you will get a real, itemised quote at no cost.
More about carports
