Range catalogue

Proven designs to build from

Some of the more common configurations we build around Bundaberg and the Wide Bay. Use them for inspiration, then request a quote straight from the design, or, open in our 3D designer and make any changes you wish and request a quote from there, and we will pull the model straight up and engineer it to your block. Every design can be resized, re-doored and re-coloured.

Every shed or carport design can be built with either a gable or a skillion roof profile, whichever suits the look and the limits on your block.

Request a quote Open the 3D Designer 07 4151 4545

3 current specials across the range right now.

See current specials

Browse by build type

Sizes shown are width x length x wall height. Every design carries a code you can quote us over the phone or send through a quote request from our quote form or 3D designer.

30m by 12m industrial shed with five side roller doors, one enclosed bay and an end-gable roller door

SS-COM-120-300

Industrial Unit 12 x 30

Six-bay workshop or trade premises

A 30m-long clear-span industrial unit with five side-access roller-door bays, one enclosed spare bay and end-gable vehicle access.

12m
Width: 30m
Length: 6m
Wall height

Gable roof · 6 bays

12m clear span portal frame
5 x roller doors along the side wall
1 x roller door in the end gable wall
1 x fully enclosed spare bay
COLORBOND® roof and wall cladding
Custom flashings and cast-in rebate vermin proofing
Full council approval and certification

See this design

12m x 30m x 6m

20m by 48m clear span steel warehouse with 5m by 5m drive-through roller doors and personal access doors

SS-COM-200-480

Warehouse Span 20 x 48

Semi-trailer drive-through warehousing

Clear-span distribution warehousing with semi-trailer drive-through access at both ends and plenty of entry points for staff.

20m
Width: 48m
Length: 6m
Wall height

Gable roof

20m clear span, no internal columns
6m eave height for racking and high vehicles
5m x 5m roller door at each gable end for semi-trailer access
6 x personal access doors (1 each end, 2 each long side)
Cyclonic wind rated engineering
COLORBOND® roof and wall cladding
Custom flashings and cast-in rebate vermin proofing

See this design

20m x 48m x 6m

How the design codes work

Each design carries a code like SS-GAR-60-60: the build type, then the width and length. Quote the code when you call or enquire and we can open the pre-built model in our design software straight away, then adjust it to your block. Nothing here is fixed - change the span, add bays, lift the walls or swap the doors.

Nothing here quite right? Everything we build is custom anyway

Draw it yourself in the 3D Designer or send us the rough idea and we will work it up with a site-specific quote.

Request a free quote Open the 3D Designer