Patios & awnings · SS-PAT-60-30
Attached Patio 6 x 3
Insulated everyday outdoor living
The standard back patio, built with insulated roofing so the space stays cooler in summer. Tied into the existing house colours so it doesn't look like an after thought
- 3m
- Width
- 6m
- Length
- 2.4m
- Wall height
Attached roof · 3m x 6m x 2.4m
What is included
- Insulated roofing panel
- Attached to fascia
- COLORBOND® roof and gutters
- Colour matched fascia, posts and flashings
- Council approval and certification
Standard specification
- Width
- 3.0m
- Length
- 6.0m
- ATTACHED HEIGHT
- 2.4m
- Roof profile
- Skillion
- Roofing
- Insulated roofing panel
- Attachment
- Attached to the house fascia
- Steel
- 100% Australian BlueScope and COLORBOND®
Standard specification shown. Sizes can all be changed to suit your site. We do not work with tiled house roofs.
About this design
A practical rear patio using insulated roofing panels to provide shade, reduce heat transfer and create a clean, finished ceiling underneath.
The patio is designed to connect to the existing house fascia, with colours and roofline selected to complement the home. This type of attachment is not suitable for every property and depends on the existing structure and available fixing points.
The design has some flexibility to be adjusted in width and projection to suit the available outdoor area, with options such as ceiling fans and downlights commonly added for greater year-round use.
Spartan Sheds installs these patio systems to suitable metal-roofed homes only. We do not undertake patio installations to homes with tiled roofs.
Popular options
Every design can be resized and reconfigured. These are the changes people make to this one most often.
- Longer to suit your requirments
- Timber posts and beams
- Downlights & fans
Good to know
- Attached insulated patios are not always possible - we check the existing roof structure, pitch and height before quoting. Site visit fees apply.
- Stormwater from the new roof must be directed to a legal discharge point
- Attached patios >10m2 always require council approval
Standard on every Spartan Sheds build
Built to a higher standard
Cast-in vermin rebate as standard
The slab is formed with a rebate that the wall sheet sits into, so the base line is sealed. No open gap for rodents, snakes. A 3mm gap is left at the bottom of the sheet to protect your Colorbond warranty, and for ease of hosing out.
Custom corner and door flashings
Corner, and door flashings are made to suit each build rather than pulled off a generic kit shelf, so all corners finish tight and straight, leaving no gaps or sharp edges.
Welded-type frame connections
Many standard kit sheds use light-gauge folded brackets at key structural connections. Spartan Sheds upgrades these critical junctions with heavy-duty welded steel plate connections and high-tensile structural bolts, with knee, apex and base plates engineered to suit the site-specific wind classification.
100% Australian BlueScope and COLORBOND® steel
Roof, walls, gutters and framing in Australian-made steel with the warranties that come with it, specified for our coastal and inland conditions.
Gable or skillion roof profile
Every design in the range can be built with a classic pitched gable roof or a single-slope skillion roof, chosen to suit the look you want, the site, and any height or setback limits on your block.
Site-specific engineering and drawings
Every build is engineered to the wind classification, soil and exposure of your actual block, not to a generic catalogue spec, and the drawings come with it for approval.
Priced to your site
We do not publish prices for a reason: wind classification, soil, slab and earthworks, truck access, coastal exposure and the council approval pathway all change from block to block, sometimes between neighbours. Send us the design code and your address and you will get a real, itemised quote at no cost.
More about patios & awnings